European Journal of Prosthodontics and Restorative Dentistry

cover art

Cover Date:
March 2017
Print ISSN:
0965-7452
Electronic ISSN:
2396-8893
Vol:
25
Issue:
1

Marginal Accuracy and Internal Fit of Dental Copings Fabricated by Modern Additive and Subtractive Digital Technologies

ABSTRACT
The margins of copings for crowns and retainers of fixed partial dentures affect the progress of microleakage and dental caries. Failures occur due to altered fit which is also influenced by the method of fabrication. An in-vitro study was conducted to determine among the cast base metal, copy milled zirconia, computer aided designing computer aided machining/manufacturing zirconia and direct metal laser sintered copings which showed best marginal accuracy and internal fit. Forty extracted maxillary premolars were mounted on an acrylic model and reduced occlusally using a milling machine up to a final tooth height of 4 mm from the cementoenamel junction. Axial reduction was accomplished on a surveyor and a chamfer finish line was given. The impressions and dies were made for fabrication of copings which were luted on the prepared teeth under standardized loading, embedded in self-cure acrylic resin, sectioned and observed using scanning electron microscope for internal gap and marginal accuracy. The copings fabricated using direct metal laser sintering technique exhibited best marginal accuracy and
internal fit. Comparison of mean between the four groups by ANOVA and post-hoc Tukey HSD tests showed a statistically significant difference between all the groups (p<0.05). It was concluded that the copings fabricated using direct metal laser sintering technique exhibited best marginal accuracy and internal fit. Additive digital technologies such as direct metal laser sintering could be cost-effective for the clinician, minimize failures related to fit and increase longevity of teeth and prostheses.

Keywords
Casting
Direct Metal Laser Sintering
Internal Fit
Marginal Accuracy
Scanning Electron Microscope


10.1922/EJPRD_01611Nelson06

Article Price
£15.00
Institution Article Price
£
Page Start
20
Page End
25
Authors
Dr Neha Nelson, Dr Jyothi K S, Dr Kiran Sunny

Articles from this issue

  • Title
  • Pg. Start
  • Pg. End

  1. Multiple Adhesive Layering Influence on Dentin Bonding and Permeability
  2. 2
  3. 8

  1. Can Cleansing Regimens Effectively Eliminate Saliva Contamination from Lithium Disilicate Ceramic Surface?
  2. 9
  3. 14

  1. The Effect of Lithium Disilicate Opacity on Polymerization of a DualCured Resin Cement
  2. 15
  3. 19

  1. Marginal Accuracy and Internal Fit of Dental Copings Fabricated by Modern Additive and Subtractive Digital Technologies
  2. 20
  3. 25

  1. Outcomes of Immediate Function Implant Prosthetic Restorations with Mechanical Complications: A Retrospective Clinical Study with 5 Years of Follow-Up
  2. 26
  3. 34

  1. A randomised controlled trial of a nanofilled composite at three years: Did selective enamel etching have an effect?
  2. 35
  3. 41

  1. A Cross-Sectional Survey on Reasons for Initial Placement and Replacement of Single Crowns
  2. 42
  3. 48

  1. Treatment Outcomes and Assessment of Oral Health Related Quality of Life in Treated Hypodontia Patients
  2. 49
  3. 56

  1. Zirconia-Reinforced Lithium Silicate Ceramic - A 2-Year Follow-up of a Clinical Experience with Anterior Crowns
  2. 57
  3. 63